How to raise the price of a recurring job in Jobber (without rewriting your history)
What I describe here comes from tests I ran in a Jobber test account on Nov 18, 2026, and from Jobber's help pages as they read that week. Jobber changes its screens from time to time, so yours may look different.
The short answer
Jobber has no button that raises the price on all your recurring jobs at once. You change each job, and there are two ways to do it. Editing the job's line item is the quick one, but your Visits report then shows the new price on visits you completed months ago. Editing the first visit at the new price and applying it to future visits leaves the past visits alone. Either way, your invoices still show what you actually billed.
I ran into this while building WellPriced. In a Jobber test account, I invoiced two visits at $175 and then raised the job to $180. The Visits report showed $180 on both. That surprised me.
A one-time adjustment or a permanent change
There are two kinds of price change, and Jobber handles them in different places.
One-time adjustments
A one-time adjustment changes a single visit, so you make it on that visit. Two cases come up most.
You spent extra time on the same service. You and the customer agree on a bit more for that day. Open the visit, click More Actions and Edit, delete the existing line item, add the exact same service again and type the agreed price over the standard one.
You did a different service that day. A deep clean right before the holidays in place of the standard clean, for example. Open the visit the same way, delete the existing line item and add the other service.
In both cases a yellow banner on the edit screen confirms that the change only updates this visit. Every other visit keeps its price.
A permanent change: the wrong way
The obvious place to raise a recurring price is the job itself. I call it the wrong way because of what it does to your records.
- Click Jobs in the side menu and open the job.
- Click the pencil icon at the top right of the Product / Service section.
- Change the unit price and click Save.
Every visit of the job now shows the new price, including the ones you completed months ago. In my test, two visits invoiced at $175 showed $180 in the Visits report after I raised the job. Your history is rewritten, and I found no way to put it back.
I am not the only one who noticed what this does to the report. An owner of a cleaning company reported the same on Jobber's community forum after a round of price increases: the Visits report displayed the updated price on all visits, future or completed. Support told them the report was working correctly. Their reply: "Completed visits should not show different pricing!" (Jobber Community, Reports are wrong).
Why does it matter? If you look back at a year of visits to see what a customer earned you, a rewritten history tells you they always paid today's price. Any comparison between customers, or between this year and last, is off by every increase you ever made.
A permanent change: the right way
The right way takes a few more clicks and leaves your completed visits alone. It has two parts.
First: give the new price its own service
When you raise prices, I recommend creating a new service for the new price, not overriding the old one job by job.
- In Products & Services, create a new service with the new price.
- Open the old service and rename it, so the two can't be confused. Add the year it applied to, or just a "." if you don't want customers to see a year.
- On the old service, untick "Available on quotes, quote templates, jobs, invoices & online booking" and click Update. It no longer shows up when you build new work.
Jobber's edit window says that changes to a service apply to new quotes, jobs and invoices, so this does not touch the jobs you already have.
Then: change the job from a visit
These steps follow Jobber's help page on visits (Jobber Help, Visits).
- Mark every visit you have already done as complete. The change below reaches every visit that is not completed, so a finished visit left open would get the new price too.
- Open the first upcoming visit that should carry the new price. Click the visit, on the schedule or in the Scheduled visits section further down the job's page. A window named Visit details opens. Click More Actions, then Edit.
- Delete the current line item and add the new service you created. You can't change the price of a line item once it is saved on a visit; deleting it and adding another is the only way.
- Save. So far only this one visit has changed; a yellow banner on the edit screen says so.
- Back in Visit details, click More Actions, then Update Future Visits.
- A window asks which settings from this visit to apply to future visits: title, time of day, repeats, assigned team and line items. Tick line items only, then Save.
- Open another upcoming visit and check that it shows the new price.
"Future visits" is a confusing name here. In my test it did not mean the visits after the one I was in; it meant every visit of the job that is not completed. Whatever the visit you start from holds is written to all of them. That is why step 1 matters, and why you should start from a visit that has exactly the line items you want everywhere. An extra you added to one upcoming visit (a one-time deep clean, for example) is overwritten too.
One thing looks odd afterwards. In my test, Jobber did not remove the old line item. It stays listed with quantity 0, next to the new one with quantity 1. So the visit's price is $185 where it was $165 before. Read the Total column, not the Unit Price column: the old item still shows its unit price, but at quantity 0 it adds nothing.
Leave the schedule boxes unticked. An owner on the forum advises against changing the schedule in the same step as the price, and I agree: if something looks wrong afterwards, you want to know which change caused it.
Another cleaning owner on the forum uses exactly this method for yearly increases and says it keeps the history of past prices (Jobber Community, Annual price increase reminders).
It's important to call out that this is still one job at a time. A single change across all jobs that carry a certain service would be the better solution, and Jobber doesn't offer one. Until it does, this is the most efficient way I found.
Fixed-price jobs and your Products & Services list
Fixed-price jobs. If a recurring job bills a fixed price (a flat monthly or seasonal fee), the visit method doesn't work. Jobber's help page explains that a line item changed on a visit does not reach the invoice there, because "fixed-rate billing jobs are not invoiced based on the visits" (Jobber Help, Visits). For these jobs the wrong way is the only way: you edit the line item on the job itself. Export your Visits report before you do, so you keep a copy of the old prices.
The Products & Services list. Changing a price in this list does not touch your existing jobs. Jobber's support team confirmed on the forum that a price change there applies only to new line items, and that this is intended. Their tip for updating the list itself: export it, change the prices in Excel and upload it again (Jobber Community, feature request).
That thread was started by a cleaning owner raising prices for 700 ongoing clients, one job at a time. Jobber passed the request to its product team and gave no date. So for now, set up the new price in the list first, as described above, and after that change each recurring job.
Before you change anything
The clicks are the easy part. Three things decide whether the increase goes smoothly.
Tell the customer first. One owner on the forum gives 45 to 60 days of notice before a yearly increase, and warns against letting the higher invoice be the only notice. I would not want to learn about a price increase from an invoice either.
Pick the moment. Make the change after the last invoice at the old price has gone out. If a customer pays automatically, check the first payment at the new price; a forum poster who raises prices job by job watches for failed automatic payments after each round.
Decide who gets raised, and by how much. Jobber makes you change one job at a time. I see that as a reason to stop raising everyone by the same percentage. Some customers already earn you a good rate; others have not been raised in years. My article on the customer you haven't raised in years has the inflation and wage numbers to size an increase.
Then set a reminder for next year. The owner whose method I describe above creates a task for the review date one year out.
Next step
Before you raise anyone, find out who needs it. To check one customer, the free bid calculator shows what a visit earns per labor hour and the price that reaches your target. To check your whole book, my guide walks through it from the Visits report.
Have you raised prices in Jobber a different way? If so - I'd like to hear how it went. Tell me about it.
Questions owners ask
Can I raise all my recurring jobs at once in Jobber?
No. Jobber has no bulk price change for existing recurring jobs. You can update your Products & Services list in one upload, but each existing job is changed on its own.
Why does my Visits report show the new price on old visits?
Because the price was changed on the job. The report then shows today's price on every visit of that job, completed ones included. Your invoices still show what you billed.
Does changing the price change invoices I already sent?
In my test it did not: the invoice kept $175 after I raised the job to $180. Jobber's help page doesn't address it.
Where do I see what I actually billed a customer?
In the Invoice report (under Financial reports). It is the record to trust for past prices.
Will the next invoice use the new price?
Yes. In my test, the invoice for the next visit carried the new price.
More Jobber how-tos
- Scheduled versus tracked time in Jobber: how to find the visits that run long
- Does Jobber count drive time per client? Where it sits and how to assign it
Sources
- Jobber Help, Edit a job (updated Nov 12, 2026)
- Jobber Help, Visits (updated Nov 13, 2026)
- Jobber Help, Visits report
- Jobber Community, Feature request: price increases in Products & Services list
- Jobber Community, Annual price increase reminders
- Jobber Community, Reports are wrong
- Jobber Community, Visits report bug
WellPriced isn't affiliated with or endorsed by Jobber. Screens and labels are as I found them on Nov 18, 2026, and may change.