Guides

Does Jobber count drive time per client? Where it sits and how to assign it

By Rene Haase ยท Updated

What I describe here comes from tests I ran in a Jobber test account between Nov 9 and Nov 18, 2026, and from Jobber's help pages as they read that month. Jobber changes its screens from time to time, so yours may look different.

The short answer

No. Jobber can record drive time, but it belongs to no client. When your crew uses the Driving timer, or simply stays on the clock between visits, the time lands in your timesheets as its own line with no job and no customer attached. No report in Jobber puts it back on the customer it was driven for. You can do that yourself from the Timesheets report, and for a route business it changes the picture: in my test, one visit earned $98 per labor hour on site and $75 once the driving around it was counted.

I am not the first to notice the gap. A developer researching it on Jobber's community forum put it this way: a client who pays $200 and is 45 minutes away can look the same in Jobber as one who pays $180 and is 5 minutes away (Jobber Community, effective hourly rate per client).

Where drive time sits in Jobber

Jobber's app has several timers. A visit timer is tied to a scheduled visit. A general timer covers time that belongs to no job, and Jobber's help page names travel as an example (Jobber Help, Timesheets). Jobber's help page lists separate timers for Driving, Office, Supplies and Break under the Plus plan (Jobber Help, Track time categories and breaks).

So drive time ends up in one of two places:

  • Under Driving, if you have that timer and your crew taps it when they leave a stop. It doesn't start by itself: finishing a visit switches the clock to General, and the crew member has to pick Driving by hand.
  • Under General, if they don't. In my test, stopping a visit timer started the general timer by itself, so a crew that only ever taps "visit" still records the time between stops. It is mixed with everything else that isn't a visit.

Either way, the entry carries no job number and no client. The help page for the categories says only that driving time counts towards the daily total.

One owner on the forum describes the common setup: the crew stays on the clock between appointments and clocks in to the next job on arrival. That records the hours for payroll. It still doesn't tell you which customer the drive was for.

One real day in numbers

This is a team member's day from my test account, as the Timesheets report shows it:

StartEndWorking onHours
12:50PM12:58PMGeneral0.13
12:58PM1:44PMJob (visit timer)0.77
1:44PM2:00PMBreak (unpaid)0.26
2:00PM3:29PMSame job (visit timer)1.49
3:29PM4:01PMDriving0.53

Paid time: 2.92 hours. Time on the visit: 2.25 hours, or 77% of it. The other 23% was driving and general time, and Jobber shows it on no customer.

The visit was priced at $220. Divide by the time on site and it earns $98 per labor hour. Divide by all the paid time it caused and it earns $75. That is the same visit and the same price; the only thing that changed is whether the drive counts.

Step by step: putting drive time on customers

  1. In Jobber, open Insights, then Reports, then Timesheets.
  2. Set the date range. Start with one or two weeks; this is work you do by hand.
  3. Select all columns and click "Receive Excel copy". Jobber emails the file.
  4. Open the file. Skip the totals block at the top and sort the entries by Name, then Date, then Start time. Each person's day now reads top to bottom.
  5. Look at the Working on column. A visit shows a job number and the client; everything else shows a category: General, Driving, Office, Break.
  6. For every Driving row, find the visit before it and the visit after it in that person's day.
  7. Give the drive to those visits (see below for how), and add it to the visit's own hours.
  8. Divide what the visit pays by its hours with the drive included. That is its revenue per labor hour.

How to split a drive between two customers is a judgment call. I split it in half: one half to the visit the crew just left, one half to the visit they are driving to. The first drive of the day goes to the first visit, the last one to the last visit. A simpler rule is to give each drive to the visit it leads to. Pick one and use it for everyone, because what you want is a fair comparison between customers.

In the day above, the only drive came after the last visit, so all 0.53 hours go to that visit: 2.25 hours on site becomes 2.78, and with the 0.13 hours of general time 2.92.

For a book of 100 recurring customers, this takes an evening or more. My guide on finding your least profitable customers shows a shortcut that estimates drive minutes per customer once, without going through every timesheet row.

If you don't have a Driving timer

Without the Driving category, travel sits under General together with loading the truck, waiting and phone calls. You can't separate it afterwards. Two things still work:

  • Use the gaps. If your crew runs a visit timer at every stop, the time between one visit's end and the next visit's start is mostly the drive. The Timesheets report shows both times.
  • Estimate once. Look up the drive between two stops on a map and use that number for every visit. It is less exact than a timer and far better than leaving the drive out.

What this can't tell you

  • Miles and fuel. Timesheets hold time. What the truck costs per mile is a separate number; my article on the far-away customer has the wage and mileage figures, and the drive time cost calculator works out what one drive costs.
  • Anything for crews that don't clock between visits. If the clock stops when a visit ends, the drive was never recorded.
  • Whose fault a long drive is. A customer can be far from everything, or just badly placed in this week's route. The timesheet shows the minutes, not the reason.

Next step

To see what the drive does to one customer, the free bid calculator takes drive minutes as its own input and shows the rate with and without them.

WellPriced does the assignment for your whole book from your Jobber exports: each drive split between the visit before and the visit after, for every person and every day (how the audit works).

Do you track drive time per customer a different way? If so - I'd like to hear how. Tell me about it.

Questions owners ask

Does Jobber's job costing include drive time?

No. In my test, the drive did not show up on the job, neither when the crew member switched to Driving right after the visit nor when a moment of General time sat in between. Driving and General entries carry no job number, and Jobber's help page on job costing doesn't mention drive time.

Do I need the Plus plan to track drive time?

For a separate Driving timer, yes, according to Jobber's help page. On other plans with time tracking, time between visits is recorded under General.

Are breaks counted?

No. Jobber's help page says break time is tracked separately as unpaid time, and in my export it was left out of the hour totals.

Should the drive go to the customer before or the customer after?

There is no rule. I split it in half between the two; giving it to the visit it leads to is simpler. What matters is using the same rule for every customer.

How much does drive time change the result?

In my test day, a $220 visit went from $98 to $75 per labor hour once driving and general time were counted. On a tight route it changes little; for a customer across town it can halve the rate.

More Jobber how-tos

Sources

WellPriced isn't affiliated with or endorsed by Jobber. Screens and labels are as I found them in November 2026, and may change.