How to find your least profitable customers: revenue per labor hour
The short answer
Divide what each recurring customer pays per visit by the labor hours that visit really takes, counting every person on the crew and the drive to get there. That's revenue per labor hour, which many lawn pros call revenue per man-hour. Then compare each customer with your own typical rate, the middle value across all your recurring customers.
The customers well below that rate are your undercharged ones. They're often not the ones you'd guess, because two customers paying the same price can earn you very different money per hour.
Why price per visit and gut feel miss it
Price per visit tells you what a customer pays, not what they earn you, because it ignores the time each visit takes. Approaches like pricing your existing book by feel and a spreadsheet don't work, because they skip the hours each customer takes, drive time included.
Raising prices is normal. In Jobber's 2026 survey of more than 1,000 home service owners, 91% of the most confident businesses raised prices (Jobber, 2026 Home Service Trends Report). The hard part is knowing which customers to raise, and by how much.
Underpricing usually hides in the same places:
- The long drive: a customer 20 minutes off your route, priced the same as the one next door.
- The long-time customer: a price that hasn't moved in years while your wages and fuel did.
- The job that grew: beds added, a bigger yard, more rooms, an extra bathroom, but the same price.
- The two-person visit: a stop that needs two people, priced like a one-person job.
The measure: revenue per labor hour
Revenue per labor hour (or per man-hour) is what a visit pays divided by the person-hours it takes, drive included. Two people on site for 30 minutes is one labor hour, not half an hour, because you pay both of them.
Revenue per labor hour = price per visit ÷ labor hours
Labor hours = crew size × (minutes on site + drive minutes) ÷ 60
Here is the same price earning very different money:
| Customer | Price per visit | Crew | Minutes on site | Drive from previous stop (min) | Labor hours | Revenue per labor hour |
|---|---|---|---|---|---|---|
| Lawn A, next door to another customer | $45 | 2 | 20 | 2 | 0.73 | $61 |
| Lawn B, across town | $45 | 2 | 25 | 18 | 1.43 | $31 |
| Cleaning C, on a tight route | $160 | 2 | 150 | 5 | 5.17 | $31 |
| Cleaning D, 35 minutes out | $160 | 2 | 150 | 35 | 6.17 | $26 |
Lawn B pays the same as Lawn A but earns half as much per hour. Nothing on the invoice shows it.
To try this on one customer of your own, or on a new bid, use the free revenue per labor hour calculator.
A first estimate from your visit history
You can get a rough ranking from one export and a spreadsheet: the Visits report in Jobber, or the similar visit or job report in other field service tools. For 100 recurring customers it takes about an evening, and most of that goes into drive minutes.
- Export your visit history. Pick the report that lists each completed visit with its price, date and time. Choose the last 12 months, include every column and export to CSV. In Jobber, that's Insights, then Reports, then Visits.
- Keep recurring visits only. Filter out one-off jobs (in Jobber, set Job type to Recurring).
- Make one row per customer. Group the visits by customer or job number: count the visits and average the price per visit (Visit based ($) in Jobber). Jobber shows every past visit at today's price, so if a customer's price changed during the year, take what you billed from your invoices.
- Minutes on site. Average the tracked time per visit if your crews run timers (Time tracked in Jobber). If they don't, use the scheduled duration and treat the result as your estimate, not a measurement.
- Crew size. Count the people assigned to each visit. If each person runs their own timer, check whether the tracked time already covers the whole crew before you multiply.
- Drive minutes. For each customer, add the minutes from the stop before it on a normal route day. A map app works; your crew lead will be faster.
- Calculate and sort. Labor hours = crew × (minutes on site + drive minutes) ÷ 60. Divide the price by labor hours and sort lowest first.
| Job # | Visits | Avg price ($) | Crew | Minutes on site | Drive minutes | Labor hours | Revenue per labor hour ($) |
|---|---|---|---|---|---|---|---|
| 112 | 28 | 45 | 2 | 25 | 18 | 1.43 | 31 |
| 87 | 28 | 45 | 2 | 20 | 2 | 0.73 | 61 |
Reading the results
Compare every customer with your own typical rate, not with an industry number. Your typical rate is the median revenue per labor hour across your recurring customers (the midpoint: half your customers earn you more per hour, half less). Use the median, not the average, because a few large jobs pull the average up.
- Start with the customers well below it. Half your list sits below the median by definition, so don't flag them all. A gap of 15% or more is a sensible place to start looking.
- Look at the top of the list too. Your best earners per hour are the customers to nurture and keep happy. Don't hand them the same increase as everyone else.
- Ignore thin data. A customer with only a handful of visits, or a number driven by one odd visit, isn't ready to act on.
To put a dollar figure on a customer, multiply three things: the gap to your typical rate, the labor hours per visit and the visits per year. If your typical rate is $50, Lawn B above is $19 short per labor hour. At 1.43 labor hours and 28 visits a season, that's about $760 a year from one $45 lawn.
At your typical rate, Lawn B would pay about $72 a visit. Nobody should jump from $45 to $72 in one letter, which is why the next step is a plan, not a price list.
Where the quick version breaks
The one-sheet version gets you a first look, but its hours are rough, and rough hours move customers up and down the list. Watch for these:
- Crews clock in for the day, not per stop. The real hours are in your Timesheets report, but splitting a day across its stops is the hard part.
- Visits marked complete in a batch at the end of the day or the next morning. The dates in the export then say little about how long each stop took.
- Time that's neither on site nor driving, like loading, fuel, dump runs and breaks. Whatever you pay for belongs in the number.
- The drive from the shop to the first stop and back at the end of the day.
- Crews that change during the day, such as a second person joining for one stop.
- Frequency that changes with the season, and add-on services done on the same visit.
- Scheduled time is a plan. The gap between planned and actual time is often where the money is.
Getting these right across a whole book is most of the work.
Before you raise anyone's price
A low number is a reason to look closer, not an automatic increase. A few checks keep a price change from costing you good customers:
- Rule out a route fix first. Some low earners are only low because of the day they're scheduled. Moving them to a day you're already nearby can close the gap without a price change.
- Close big gaps in steps. A customer far below your rate usually needs two or three increases over time, not one large one.
- Raise in groups, not all at once. Send the first group, see who cancels, then decide on the rest.
- Leave your best earners alone. Skip them at the next increase; a cheaper quote is what tempts them away.
- Give written notice well before the season or the next billing cycle starts.
- Count what a cancellation frees up. When an undercharged customer leaves, the crew hours go to someone who pays your typical rate.
Questions owners ask
Does drive time really count?
Yes. You pay the crew while they drive, and you pay for the fuel. Leave it out and every customer at the edge of your route looks better than it is.
What about two-person crews?
Count person-hours. Two people on site for 30 minutes is one labor hour.
Is this the same as revenue per man-hour?
Yes. Labor hour, man-hour and person-hour all mean one person working for one hour, so the numbers compare directly.
What's a good revenue per man-hour?
It depends on your market, wages and services, so there's no single right number. The figure lawn pros quote most comes from GreenPal's poll of more than 10,000 providers on its platform: about 78% charge at least $60 per person per hour of on-site work (GreenPal, 2026). That's per hour on site, without the drive. Count the drive, as this guide does, and the same business shows a lower number, so compare like with like. To decide which customers to raise, the comparison that matters is still the one with your own typical rate.
My crews don't run visit timers. Can I still do this?
Yes. Use scheduled durations as a stand-in and call the result an estimate. Daily clock-ins are better data, but they have to be split across the day's stops.
Doesn't Jobber's job costing already show this?
Job costing, on the Grow and Plus plans, shows profit and margin on each job; for a recurring job it covers the last 30 days (Jobber Help). That helps with one job at a time. The Recurring jobs report has no time or profit columns, so ranking your whole recurring book still means combining exports. More in Does Jobber's job costing show which recurring customers to raise?
How often should I check?
Before each round of price increases, and whenever a crew's time at a property starts creeping up.
Does this work beyond lawn and cleaning?
Yes. Any recurring route service, such as pool or pest control, has the same price-per-visit blind spot.