Guides · Pricing problem: The far-away customer

Should you charge more for far-away customers? What drive time costs

By Rene Haase · Updated

Price your own drive

The free drive time cost calculator shows what one drive costs your crew and your truck, per visit and per year. It also gives the travel fee that covers it. Enter the distance and your crew; the rest starts at sourced defaults you can change.

Same price, half the money

Two customers each pay you $100 a visit. Lawn A is next door to another customer: two people, 20 minutes on site, a 2-minute drive. Lawn B is across town: two people, 25 minutes on site, 18 minutes from the previous stop. Lawn A earns you $136 per labor hour (what the visit pays divided by the crew hours it takes, drive included). Lawn B earns $70.

Conventional wisdom states that fuel is what makes a far-away customer expensive. But the numbers show a different story. On that 18-minute drive, the two people in the truck cost about $11.29 in wages; the truck itself costs about $6.84. The crew's time is the bigger bill, and it never shows up on a fuel receipt.

I built WellPriced to find customers like Lawn B in the books of lawn care and cleaning businesses. For this article I pulled the public numbers on what a mile and a crew minute cost (from the IRS, the Energy Information Administration and the Bureau of Labor Statistics), and I added what owners have said on the record about their own routes.

The problem

Drive time is labor you pay for and cannot bill. A price per visit is set by the size of the job (the lawn, the house); the drive rarely enters the quote. So two identical jobs get identical prices, even when one of them takes twice the crew hours once you count the driving time.

Why does it go unnoticed? On paper the drive belongs to no customer. The timesheet shows a full day and the invoices show full prices; the lost half hour sits between them.

Nobody sees it.

How do far-away customers get into the book in the first place? I believe most arrive the same way: a referral, a friend of a good customer, a job taken in a slow month. Each one made sense on the day you said yes.

What it costs you

Take Lawn B. The two lawns are made up; the wage and mileage rates behind the math are real.

The 18-minute drive ties up two people in one truck, which is 0.6 labor hours. At the median pay for landscaping workers ($18.82 an hour in May 2025), that is $11.29 in wages. For the truck I need miles: Kyle MacDonald of Force Fleet Tracking puts the average in-town speed across his customers at about 30 miles an hour (Jobber podcast), which makes the drive 9 miles. At the current IRS business rate of 76 cents a mile, that is $6.84.

Together the drive costs $18.13, or 18% of the $100 price. That money is spent before the mower leaves the trailer.

Lawn A's 2-minute drive costs about $2.01 by the same math. The difference is $16.12 a visit; over a 28-visit season it comes to about $451 on one customer.

Cleaning works the same way. A two-person team sharing one car and driving 35 minutes to a $160 clean spends about $19.92 in wages (at the $17.07 median for house cleaners) and $13.30 on the vehicle: $33.22 before anyone unpacks a vacuum. If each cleaner drives their own car, the vehicle figure doubles to $26.60.

These figures count wages only. Payroll taxes and workers' compensation come on top.

Fully loaded or variable: two ways to count the drive

The $6.84 for the truck is a fully loaded number. The IRS bases its business rate on the fixed and variable costs of running a vehicle (IRS), so the rate spreads the truck payment and depreciation over every mile. When the IRS set the 2026 rate at 72.5 cents a mile in January (before raising it to 76 cents in July), it put 35 cents of that down to depreciation (IRS Notice 2026-10).

That matters. Some of those costs stay with you even if Lawn B leaves. The test I use is simple: if the job goes away, does the cost go away too? If it does, it's a variable cost. If it doesn't, it's fixed. Drop Lawn B and you still make the truck payment; you stop buying fuel for those 9 miles.

Here is Lawn B's drive counted both ways. The crew line is the same in both columns; only the truck changes.

Lawn B's 18-minute driveFully loadedVariable
Crew pay, 0.6 labor hours at $18.82$11.29$11.29
Truck, 9 miles$6.84$2.93
Drive cost per visit$18.13$14.22
Over a 28-visit season$508$398

The fully loaded truck is the IRS rate: 9 miles at 76 cents. For the variable truck I priced fuel at 20.3 miles a gallon (the EPA's average for 2024 pickups, EPA) and $4.31 a gallon (the October 2026 U.S. average in Finding 2 below), which comes to $1.91. Wear and tear is 11.36 cents a mile, AAA's figure for maintenance, repair and tires on a half-ton pickup (AAA): another $1.02.

The two numbers answer different questions. The variable cost is what you save if the customer goes away, so it's the number for deciding whether to keep, move or drop a stop this season. The fully loaded cost is what the price has to cover over time; someone has to pay for the truck, and it should be the customers who use it.

One caveat on the crew line. Crew pay only goes away if dropping the stop really shortens paid hours. For an hourly crew whose day ends when the route ends, it does. For a salaried crew it doesn't: you pay them either way.

Either way, the crew is the biggest line. The truck moves the total by less than $4 a visit; the two people in it cost $11.29 in both columns.

To work out the variable cost of any drive (with your own crew, pay, mileage and fuel price), use the free drive time cost calculator. It adds payroll taxes and workers' comp on top of pay (15% unless you change it), so for Lawn B its crew line comes to $12.99.

The facts

A word on where the numbers come from. For the vehicle I use the IRS standard mileage rate for business (the per-mile amount the IRS allows for business driving, set each year). For fuel I use the U.S. average retail price of regular gasoline from the Energy Information Administration (EIA), pulled via FRED, the St. Louis Fed's database. For pay I use the Bureau of Labor Statistics (BLS) Occupational Employment and Wage Statistics survey. The arithmetic is my own; every source is linked.

Finding 1: A crew minute costs 49% to 63% more than in 2016

The table prices a 15-minute drive for a two-person crew at median pay. That is half a labor hour, so each figure is half the hourly wage.

May ofLandscaping workers, median hourly pay15-minute drive, two-person lawn crewHouse cleaners, median hourly pay15-minute drive, two-person cleaning team
2016$12.65$6.33$10.49$5.25
2017$13.31$6.66$10.99$5.50
2018$13.94$6.97$11.43$5.72
2019$14.63$7.32$11.95$5.98
2020$15.26$7.63$12.61$6.31
2021$16.55$8.28$13.84$6.92
2022$17.26$8.63$14.40$7.20
2023$17.96$8.98$16.08$8.04
2024$18.31$9.16$16.66$8.33
2025$18.82$9.41$17.07$8.54

Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, national estimates for Landscaping and Groundskeeping Workers and Maids and Housekeeping Cleaners, May of each year (all years). Drive costs are my calculation: two people for 15 minutes at the median wage.

The same drive that cost a lawn crew $6.33 in wages in 2016 cost $9.41 in 2025 (49% more). For a cleaning team it went from $5.25 to $8.54 (63% more). The route did not get longer. The people in the truck got more expensive.

Finding 2: A mile costs 30% more, and fuel swings hard

YearIRS business mileage rate (cents per mile)Regular gasoline, U.S. average (dollars per gallon)
201654$2.14
201753.5$2.42
201854.5$2.72
201958$2.60
202057.5$2.17
202156$3.01
202258.5, then 62.5 from July$3.95
202365.5$3.52
202467$3.30
202570$3.10
202672.5, then 76 from July$4.31 in October

Sources: IRS, Standard mileage rates; U.S. Energy Information Administration, regular gasoline, all formulations, annual average via FRED series GASREGA and the October 2026 monthly average via FRED series GASREGM.

The IRS rate rose from 54 cents a mile in 2016 to 70 cents in 2025 (30% more), and the IRS raised it again in the middle of 2026, to 76 cents.

What surprised me was how little a yearly fuel average tells you. 2025 was the cheapest year for gasoline since 2021, at $3.10 a gallon; ten months later the monthly average was $4.31 (39% higher, and about double the 2016 price). A customer priced when fuel was cheap stays at that price when it isn't.

One caution on the IRS figure: it is set for ordinary business vehicles. I believe a truck pulling a loaded trailer costs more per mile than that, so I treat the rate as a floor for the fully loaded cost.

Finding 3: Owners who measured found 15% to 30% of the day in the truck

Beau Batcheller, co-founder of Five Stones Landscape in Oklahoma City, checked his own crews and found they spent 30% of an eight-hour workday driving (that is 2.4 hours per person). His rule now is no more than 15 minutes between recurring properties (Jobber podcast).

K&D Landscaping wrote in Lawn & Landscape that drive time was its worst waste, with more than 15% of maintenance and lawn care hours spent in the truck (Lawn & Landscape).

At the tight end, Michael Scarsella of Brothers Lawncare and Landscaping in Baton Rouge keeps routes dense and aims for no more than 3 to 5 minutes of driving between jobs (WAFB, June 2026).

Three companies is a small sample. But the spread itself is the point: between a 4-minute hop and an 18-minute haul, the same $100 lawn is a different business.

Finding 4: Owners are already pulling their service areas in

Tally Edges Lawn Care once served all of Tallahassee. Last year it narrowed to the east side of the city; this year it serves nine neighborhoods. Co-owner Parker Leach told WTXL the company made the cuts over about two years, mainly to reduce driving time, fuel and the labor tied up in its trucks (WTXL, July 2026).

In Baton Rouge, Jamal Vaughn of Four Seasons Lawn and Garden said companies there have shortened routes and dropped customers because the travel time cut into what they earned (WAFB, as above).

Batcheller's own math explains why. A 30-minute drive with three employees at $20 an hour costs $60 in labor; add $20 of overhead and the trip costs $80. Against a $50 lawn, he said, he would in effect be paying the client $30 to mow it.

How to spot it in your own book

Four signs point to a far-away customer:

  • The lone pin: a customer with none of your other customers within a few minutes.
  • First or last stop of the day: the stop you tack on at one end of the route because it fits nowhere else.
  • In-town price: the customer pays what a similar job pays in the middle of your densest neighborhood.
  • The day that runs long: the route that includes this customer is the one that finishes late.

But distance from your shop will mislead you. What counts is the drive from the previous stop, on the day you go there. A customer 25 minutes from the shop with three of your other customers on the same street can be one of your best stops; a customer 10 minutes away in the wrong direction can be one of your worst.

So the answer changes every time the route does. Working it out takes visit order, drive minutes and crew size lined up stop by stop (and most owners only have the invoice).

Ways to fix it, with trade-offs

The cheapest fix is often not a price increase; start with the route.

Move the day. You put the customer on a day when a crew is already nearby. It costs the customer nothing and removes most of the drive. It only works if you have a route near them, and the customer has to accept a new day.

Build density around them. You go after the neighbors (door hangers, a referral offer for that street). A second customer on the street splits the drive between two stops. It takes a season to show results, and it may not work.

Price the drive in. You raise the customer to what the stop takes, or you add a trip charge outside your core area. Beau Batcheller's advice is to charge drive time to the customer on a new job more than 30 minutes away. Existing customers notice a new fee, and some will leave; for a stop that loses money, that can be an acceptable result.

To find the number, use the free revenue per labor hour calculator: enter the crew, the minutes on site and the drive, set the rate you want per labor hour, and it gives you the price that gets the stop there.

For a trip charge, the free drive time cost calculator gives you the number directly: what the drive costs in crew pay and on the truck, rounded up to a travel fee.

Draw a line for new customers. You set a service area and say no outside it, as Tally Edges did. You stop adding to the problem, but you turn down revenue while you wait for density to build.

Part ways. A last resort. Refer the customer to a company that works their neighborhood.

Any one of these is manageable for a single customer. Across a whole book, the hard part is knowing which customers are far in crew hours (the map alone won't tell you) and which fix fits each one.

What this data can't tell you

It's important to call out that the fuel prices are national averages. In 2025 the regional average for regular gasoline ranged from $2.39 a gallon on the Gulf Coast to $4.32 on the West Coast (EIA), so your own number may sit well away from the table.

The IRS mileage rate is a tax figure for ordinary business vehicles; nobody built it for a truck and trailer. The variable cost in my example leans on two more averages: the EPA's 20.3 miles a gallon for 2024 pickups (without a trailer) and AAA's wear figure for a new pickup. A truck pulling a loaded trailer burns more fuel and wears faster. The wage figures are medians for employees, and they leave out payroll taxes.

The share-of-day numbers come from three companies that chose to talk about it. That is not a survey. My worked example also rests on one assumption you should replace with your own: 30 miles an hour in town.

I don't yet have enough data of my own to say how many customers accept a new day or a trip charge. I plan to publish how customers respond to price changes once I do, from anonymized numbers combined across at least 10 companies (how we handle your data).

Next step

You can check one customer right now: the free revenue per labor hour calculator shows what a visit earns you per hour with and without the drive. To price the drive itself, the free drive time cost calculator shows what each drive costs your crew and your truck.

Have you moved, re-priced or dropped a far-away customer? If so - I'd like to hear how it went. Tell me about it.

Questions owners ask

How far is too far?

There is no single number. Beau Batcheller's rule is no more than 15 minutes between recurring properties; Michael Scarsella aims for 3 to 5. What matters is what the stop earns per labor hour once the drive is counted.

Should I add a trip charge?

For new customers outside your core area, it is the simplest fix. For an existing customer I would try moving the day first, because it costs them nothing.

Is fuel the main cost of a long drive?

No. In the example in this guide, the crew's wages for the drive were $11.29 and the vehicle was $6.84 at the IRS rate, or $2.93 counting fuel and wear alone.

Does the drive back to the shop count?

Yes. You pay the crew for it, so it belongs in the number.

More pricing problems

Sources